End Cutters

These End Cutters are available to be purchased from our online Cutting Tool Store at www.BWDarrahTools.com.  If you do not see what you are looking for, please contact us and we will help you to find the best tool for your application.

End cutters have the cutting edge on the end of the cutter and depending on the amount of cutting edge bevel can be used to trim wires very close to a surface.

Standard End Cutters

KN6801-160

Knipex 6801-160 End Cutter

The KN6801-160 has a cutting capacity of .090” diameter hard wire. The cutter is made of high grade special tool steel, oil-hardened and tempered. The cutting edges are induction hardened and approximately 61 HRC.

 

KN6701-140, KN6701-160, KN6701-200

Knipex 6701 series high leverage end cutter

The KN6701 series comes in three sizes; the 140 is 5.5” in length with a cutting capacity of .078” diameter, the 160 is 6.25” in length with a cutting capacity of .098” diameter, and the 200 is 8” in length with a cutting capacity of .118” diameter. The tools are made of Chrome Vanadium electric steel, oil-hardened and tempered and the cutting edges are induction hardened to approximately 61 HRC.

KN6901-130

Knipex 6901-130 Mechanics End Cutting Nipper

The Mechanics End Cutting Nipper, KN6901-130, is an ideal tool for cutting extremely thin wires of copper, aluminum and very hard alloy steels. The maximum cutting capacity is .039” diameter and for intricate, close work the tool is exceptional. The tool is made of Chrome Vanadium electric steel, oil-hardened and tempered and the cutting edges are induction hardened to approximately 64 HRC.

Right-angled End Cutters

KN6101-200

Knipex 6101-200 Bolt End Cutting Knippers

The Bolt End Cutting Nippers, KN6101-200,  are a real workhorse and can cut up to .137 hard wire. The tool is made of Vanadium electric steel, oil-hardened and tempered and the cutting edges are induction hardened to approximately 64 HRC. The high cutting capacity is available with minimum effort due to the tool’s optimum transmission ratio.

Spring Assisted End Cutters

D3010-150

D31010-150 Spring assisted end cutter

The D3010-150 is 6” long and is often used in the spring industry where the spring return and compound lever design reduces operator fatigue in repetitive cutting situations. The cutting capacity is 0.118" diameter hard wire.

Shopping Cart
Visit our
Cutting Tool Store


Scrubs-In-A-Bucket (72 count per bucket)
Scrubs-in-a-bucket®
Clean hands away from the sink - Anywhere, Anyplace, Anytime!


Steel Mill Applications Vale shears for cutting bars
For cutting large diameter bars (up to 63mm dia.) Vale offers a complete range of shears.